nsf

Certified to
NSF/ANSI/CAN 60

Calcite is a crushed and screened white marble media which can inexpensively be used to neutralize acidic or low pH waters to a neutral, less corrosive effluent.

Made in The USA

Features

  • Naturally occurring material
  • Low uniformity coefficient for maximum contact for controlled pH correction
  • Slower reacting for controlled pH correction
  • Inexpensive

Calcite is a naturally occurring calcium carbonate media. One of the advantages of Calcite is its self-limiting property. When properly applied, it corrects pH only enough to reach a non-corrosive equilibrium. It does not overcorrect under normal conditions. Upon contact with Calcite, acidic waters slowly dissolve the calcium carbonate to raise the pH which reduces the potential leaching of copper, lead and other metals found in typical plumbing systems. Periodic backwashing will prevent packing, reclassify the bed and maintain high service rates. Depending on pH, water chemistry and service flow, the Calcite bed will have to be periodically replenished as the Calcite is depleted.

As the Calcite’s calcium carbonate neutralizes the water, it will increase hardness and a softener may become necessary after the neutralizing filter.

Calcite can be effectively combined with Clack Corosex to combine the high flow neutralization properties of Corosex, along with the slower reacting low flow properties of Calcite, increasing the ability to correct low pH.

Specifications

Physical properties
Bulk Density 90 lbs./cu. ft
Apparent Density
Effective Size 0.4 mm
Uniformity Coefficient 1.5
Mesh Size 16 x 40
Acid Solubility
Caustic Solubility
Type
Crystal System
Specific Gravity 2.7
Ash Content
Iodine Number
Moisture
Moisture as packed
Particle Shape
pH
Hardness 3.0 (Mohs scale)
Composition
Porosity
Screen Grading
Color Near white
Conditions for operation
Water pH range 5.0-7.0
Maximum Water Temperature
Dissolved Oxygen Concentration
Bed Gravel support bed is recommended
Bed depth 24-30 in.
Minimum Bed depth
Freeboard 50% of bed depth (min.)
Service flow rate 3-6 gpm/sq. ft. but may be modified to adapt to local conditions
Backwash flow rate 8-12 gpm/sq. ft.
Backwash
Backwash bed expansion 12% minimum
Capacity
Air/Water Scour
Raw Water Rinse
Other

Ordering Information

Code Model Cu. Ft./Bag Weight/Cu. Ft.
Lbs (Approximate)
Bags/Pallet Weight/Pallet
Lbs
Pallet Dimensions
A8021-01 Calcite .55 (50 lbs.) 90 49 49 48” x 40” x 32”